lp://staging/ubuntu/quantal-updates/mdadm

Branch merges

Propose for merging

No branches dependent on this one.

Related source package recipes

No recipes using this branch. (?)

Create packaging recipe

Related snap packages

Related bugs

Related blueprints

68. By Dimitri John Ledkov on 2013-03-26

Remove unused conffile. (LP: #1127867)

67. By Dimitri John Ledkov on 2012-08-21

Applying relevant changes from precise SRU:
udev-md-raid.rules to not auto-start arrays based on detection
of ddf or isw (imsm) signatures; this conflicts with dmraid usage in
precise and requires more analysis before it can be enabled in SRU.
LP: #1030292. Thanks to Steve Langasek.

66. By Dimitri John Ledkov on 2012-06-25

Copy udev rule from /etc/udev/rules.d/ as well as the
/lib/udev/rules.d/, to allow local administrator to override mdadm
rules file (LP: #1017407)

65. By Dimitri John Ledkov on 2012-06-15

* Merge from Debian testing. (LP: #920324) Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).

* Additional Ubuntu changes:
    - debian/initramfs/local-premount: add call wait_for_udev to wait a
    little longer for RAID devices to appear (LP: #942106)

* Dropped Ubuntu changes:
  - Build udeb with -O2 on ppc64, working around a link error. Builds
    fine without it on debian.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so
    that the rules file ends up with a more reasonable name. debian/rules
    changes for adding ubuntu's udev rule corresponding to mdadm. As we
    are now using 'upstream' udev rules see 3.2.3-2ubuntu2.

* Changes to Ubuntu changes:
  - debian/source_mdadm.py: make apport hook python 2 and 3 compatible
    (LP: #1013171).

* New upstream release closes this bugs:
  - mdadm --detail --scan segfaults during update-initramfs (LP: #969384)

64. By Dimitri John Ledkov on 2012-05-21

* Minimizing the merge-diff from Debian:
  + debian/rules, debian/mdadm.udev, debian/mdadm.mdadm-blkid.udev:
    Drop our own udev rules in favour of upstream's. Debian did so in
    3.0~devel3-43-g2800528-1. Upstream's rules have everything we had.
    (LP: #1002357, LP: #968074)
  + debian/initramfs/hooks: Update to copy only the new/correct udev rules
    file.
  + debian/rules: Remove pointless diff against debian. And now mdmon
  installs itself (LP: #957494).

* debian/patches/series: Remove `disable-udev-incr-assembly.diff' to
  enable incremental assembly, now that we are using upstream rules & we
  always had incremental assembly enabled.

* Fixing lintian tags, that are introduced in Ubuntu:
  + debian/source_mdadm.py: fix executable-not-elf-or-script
  + debian/changelog: correct trailer formating of acient changelog entry

63. By Clint Byrum on 2012-02-09

* Merge from Debian testing. (LP: #920324) Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).

62. By Clint Byrum on 2011-12-16

* Merge from debian unstable. Remaining changes:
  - Call checks in local-premount to avoid race condition with udev
    and opening a degraded array.
  - d/initramfs/mdadm-functions: Record in /run when boot-degraded
    question has been asked so that it is only asked once
  - pass --test to mdadm to enable result codes for degraded arrays.
  - Build udeb with -O2 on ppc64, working around a link error.
  - debian/control: we need udev and util-linux in the right version. We
    also remove the build dependency from quilt and docbook-to-man as both
    are not used in Ubuntus mdadm.
  - debian/initramfs/hook: kept the Ubuntus version for handling the absence
    of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
  - debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
    debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
  - debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
    unused startall script
  - debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
    instead. Resolved merge conflict by keeping Ubuntu's version.
  - debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
    boot-degraded enablement; maintain udev starting of RAID devices;
    init-premount hook script for the initramfs, to provide information at
    boot
  - debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
  - debian/rules: Kept Ubuntus version for installing apport hooks, not
    installing un-used startall script and for adding a udev rule
    corresponding to mdadm.
  - debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
    installer changes
  - debian/presubj: Dropped this unused bug reporting file. Instead use
    source_mdadm.py act as an apport hook for bug handling.
  - rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
    the rules file ends up with a more reasonable name
  - d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
    incrementally adds mdadm member when detected. Starting such an
    array in degraded mode is possible by mdadm -IRs. Using mdadm
    -ARs without stopping the array first does nothing when no
    mdarray-unassociated device is available. Using mdadm -IRs to
    start a previously partially assembled array through incremental
    mode. Keeping the mdadm -ARs for assembling arrays which were for
    some reason not assembled through incremental mode (i.e through
    mdadm's udev rule).
* Disabling -fno-strict-aliasing as according to debian bug 375876 it
  has been unnecessary since mdadm 2.5.2
* Dropped changes:
  - applied upstream
  - d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
    compiler flags until upstream solves the issue. (fixed upstream)
  - d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
    /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
    (change also done in debian)
* d/rules: add 'man' to build mdadm.8

61. By Clint Byrum on 2011-08-24

* d/initramfs/mdadm-functions: Record in /run when boot-degraded
  question has been asked so that it is only asked once (LP: #820111)
* d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
  /run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
* d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
  compiler flags until upstream solves the issue. (LP: #829463)

60. By Clint Byrum on 2011-05-24

Call checks in local-premount to avoid race condition with udev
and opening a degraded array. (LP: #778520)

59. By Clint Byrum on 2011-04-27

pass --test to mdadm to enable result codes for degraded arrays.
(LP: #761971)