lp://staging/ubuntu/precise/u-boot-linaro
- Get this branch:
- bzr branch lp://staging/ubuntu/precise/u-boot-linaro
Related bugs
Related blueprints
Branch information
- Owner:
- Ubuntu branches
- Status:
- Mature
Recent revisions
- 4239. By John Rigby
-
Update to upstream 2012.02.3 u-boot-linaro which includes patch
to correct memory size on rev C4 Beagle.
(LP: #928580). - 4238. By Robie Basak
-
Mark u-boot-
linaro- omap4-panda- splusb for Multi-Arch: foreign, so that
this can be installed on non-arm hosts for USB-booting ARM boards.
(LP: #956037). - 4237. By John Rigby
-
* Update to upstream 2012.02.2 u-boot-linaro
[ John Rigby ]
* SAUCE: Snowball: init serial later
* MMC: arm_pl180_mmci: allow multiple devices
* OMAP3 Beagle and OMAP4: add preEnv.txt support (LP: 932436)[ Rob Herring ]
* net: allow setting env enetaddr from net device setting
* net: add Calxeda xgmac driver
* ARM: highbank: enable networking and pxe
* ARM: highbank: Add boot counter support
* ARM: highbank: add reset support
* ARM: highbank: setup env from boot source register
* ARM: highbank: change TEXT_BASE to 0x8000
* ARM: highbank: add autoboot script files
* ARM: highbank: fix us_to_tick calculation
* ARM: highbank: update autoboot bootdelay value[ Jason Hobbs ]
* configs/highbank.h: point at env in nvram
* configs/highbank.h: correct the fdt_addr env variable[ Robie Basak ]
* OMAP4: Force PXE booting when booting via spl-usb (LP: 927956) - 4234. By John Rigby
-
* omap4: reduce default operating point for 4460 devices
Reduce the operating point for 4460 to OPP100 (MPU at 700MHz)
(LP: #867670)
From bug report:
With both A9 cores loaded 4460 reaches max temperature in about 30s at the
current operating point of 930MHz. The operating point should be lowered to
700MHz.
It appears the panda heats more than I thought (and much more that the blaze),
and by loading the 2 cores I can quite easily reach max temperature at 920MHz
(it takes around 30s on my board!).
At 700MHz, the temperature still increases but much slower. So if the A9 cores
do not run at 100% all the time we shall be ok.
So for now, we definitely need this change if we don't want to run with a
heatsink...
* mmc: omap: enable high capacity
Enable high capacity to host capability.
Fixes eMMC detection on boot from MMC/SD card.
mmc: omap: config VMMC, MMC1_PBIAS
Config VMMC voltage to 3V for MMC/SD card slot
and PBIAS settings needed for OMAP4
(LP: #867650) - 4233. By John Rigby
-
FFe: u-boot-linaro 11.09, misc fixes for new silicon and boards
(LP: #851974)
mmc: omap: enable high capacity
mmc: omap: config VMMC, MMC1_PBIAS
omap4: fix pad configuration settings for SDP and Panda
omap4: make SDRAM init work for ES1.0 silicon
omap4: IO settings
pxe: make the first label the implicit default
OMAP4: removing fdt_addr from the default env
U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
(LP: #837235)
Revert "armv7: adapt omap3 to the new cache maintenance framework"
(LP: #862013) - 4231. By John Rigby
-
Allow loading of u-boot.bin as well as u-boot.img
Feature freeze exception (LP: #836748)
Branch metadata
- Branch format:
- Branch format 7
- Repository format:
- Bazaar repository format 2a (needs bzr 1.16 or later)
- Stacked on:
- lp://staging/ubuntu/quantal/u-boot-linaro