lp://staging/ubuntu/lucid-updates/linux-qcm-msm

Branch merges

Propose for merging

No branches dependent on this one.

Related source package recipes

No recipes using this branch. (?)

Create packaging recipe

Related snap packages

Related bugs

Related blueprints

4. By Stefan Bader on 2010-06-12

[ Andy Whitcroft ]

* rebase to Ubuntu-2.6.31-22.61
* update to ubuntu-debian:7e708d33054c373faf41da23b73e8b48c342d958
  - LP: #570500, #576274

[ Ubuntu: 2.6.31-22.61 ]

* SAUCE: docs -- fix doc strings for fc_event_seq
* update to ubuntu-debian:7e708d33054c373faf41da23b73e8b48c342d958
  - LP: #570500, #576274
* SAUCE: sched: update load count only once per cpu in 10 tick update
  window
  - LP: #513848
* (pre-stable) x86-32, resume: do a global tlb flush in S4 resume
  - LP: #531309
* PCI: Ensure we re-enable devices on resume
  - LP: #566149

3. By Stefan Bader on 2010-05-25

[ Stefan Bader ]

* Rebase to 2.6.31-22.60

[ Ubuntu: 2.6.31-22.60 ]

* kvm: restrict writing of segment selectors to segment registers
  - CVE-2010-0419
* USB: usbfs: properly clean up the as structure on error paths
  - CVE-2010-1083
* Bluetooth: Fix potential bad memory access with sysfs files
  - CVE-2010-1084
* ALSA: hda-intel: Avoid divide by zero crash
  - CVE-2010-1085
* dvb-core: Fix DoS bug in ULE decapsulation code that can be triggered
  by an invalid Payload Pointer
  - CVE-2010-1086
* GFS2: Skip check for mandatory locks when unlocking
  - CVE-2010-0727
* tipc: Fix oops on send prior to entering networked mode (v3)
  - CVE-2010-1187
* inotify: do not reuse watch descriptors
  - LP: #485556
* idr: fix a critical misallocation bug, take#2
  - LP: #485556
* tty: release_one_tty() forgets to put pids
  - CVE-2010-1162
* reiserfs: fix permissions on .reiserfs_priv
  - CVE-2010-1146
* fix LOOKUP_FOLLOW on automount "symlinks"
  - CVE-2010-1088
* NFS: Fix an Oops when truncating a file
  - CVE-2010-1087
* Attempt #2 to handle null nameidata
  - CVE-2010-1148
* r8169: Fix receive buffer length when MTU is between 1515 and 1536
  - CVE-2009-4537
* r8169: offical fix for CVE-2009-4537 (overlength frame DMAs)
  - CVE-2009-4537
* KVM: Use kvm_{read,write}_guest_virt() to read and write segment
  descriptors
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: x86 emulator: Check CPL level during privilege instruction
  emulation
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: x86 emulator: Add Virtual-8086 mode of emulation
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: x86 emulator: fix memory access during x86 emulation
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: x86 emulator: Check IOPL level during io instruction emulation
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: x86 emulator: Fix popf emulation
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: VMX: Use macros instead of hex value on cr0 initialization
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: SVM: Reset cr0 properly on vcpu reset
  - CVE-2010-0298
  - CVE-2010-0306
* KVM: x86: disable paravirt mmu reporting
  - CVE-2010-0298
  - CVE-2010-0306

2. By Andy Whitcroft on 2010-03-31

[ Andy Whitcroft ]

* getabis -- get the correct source package
* rebase to Ubuntu-2.6.31-21.59

[ Ubuntu: 2.6.31-21.59 ]

* [Config] generic-pae switch to M586TSC
  - LP: #519448
* (pre-stable) drm/i915: Increase fb alignment to 64k
  - LP: #404064
* Input: i8042 - bypass AUX IRQ delivery test on laptops
  - LP: #534448
* SAUCE: Fix volume hotkeys for Dell Studio 1557
  - LP: #465250
* SAUCE: aufs: Fix header files inclusion in debug.h
  - LP: #517151
* [Config] Enable all CGROUP configuration options
  - LP: #480739
* Revert "[Upstream] acerhdf: Limit modalias matching to supported
  boards"
  - LP: #509730
* [Config] ext3 defaults to ordered mode
  - LP: #510067
* [Config] Fix sub-flavours package conflicts
  - LP: #454827
* PCI/cardbus: Add a fixup hook and fix powerpc
  - LP: #455723
* fnctl: f_modown should call write_lock_irqsave/restore
  - LP: #519436
* ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C
  - LP: #516325
* tg3: Add 57788, remove 57720
  - LP: #515390
* HID: ignore all recent SoundGraph iMON devices
  - LP: #488443
* Input: ALPS - add interleaved protocol support (Dell E6x00 series)
  - LP: #296610
* acerhdf: limit modalias matching to supported
  - LP: #509730
* ASoC: Do not write to invalid registers on the wm9712.
  - LP: #509730
* cifs: NULL out tcon, pSesInfo, and srvTcp pointers when chasing DFS
  referrals
  - LP: #509730
* clockevents: Prevent clockevent_devices list corruption on cpu hotplug
  - LP: #509730
* dma: at_hdmac: correct incompatible type for argument 1 of
  'spin_lock_bh'
  - LP: #509730
* drivers/net/usb: Correct code taking the size of a pointer
  - LP: #509730
* Libertas: fix buffer overflow in lbs_get_essid()
  - LP: #509730
* md: Fix unfortunate interaction with evms
  - LP: #509730
* pata_cmd64x: fix overclocking of UDMA0-2 modes
  - LP: #509730
* pata_hpt3x2n: fix clock turnaround
  - LP: #509730
* SCSI: fc class: fix fc_transport_init error handling
  - LP: #509730
* sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM buffer
  - LP: #509730
* USB: emi62: fix crash when trying to load EMI 6|2 firmware
  - LP: #509730
* USB: Fix a bug on appledisplay.c regarding signedness
  - LP: #509730
* USB: musb: gadget_ep0: avoid SetupEnd interrupt
  - LP: #509730
* USB: option: support hi speed for modem Haier CE100
  - LP: #490068, #509730
* x86, cpuid: Add "volatile" to asm in native_cpuid()
  - LP: #509730
* e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation
  failure
  - LP: #509730
* e100: Fix broken cbs accounting due to missing memset.
  - LP: #509730
* hostap: Revert a toxic part of the conversion to net_device_ops
  - LP: #509730
* hwmon: (fschmd) Fix check on unsigned in watchdog_write()
  - LP: #509730
* hwmon: (sht15) Off-by-one error in array index + incorrect constants
  - LP: #509730
* i2c/tsl2550: Fix lux value in extended mode
  - LP: #509730
* ipv6: reassembly: use seperate reassembly queues for conntrack and
  local delivery
  - LP: #509730
* S390: dasd: support DIAG access for read-only devices
  - LP: #509730
* udf: Try harder when looking for VAT inode
  - LP: #509730
* V4L/DVB (13596): ov511.c typo: lock => unlock
  - LP: #509730
* x86/ptrace: make genregs[32]_get/set more robust
  - LP: #509730
* XFS bug in log recover with quota (bugzilla id 855)
  - LP: #509730
* generic_permission: MAY_OPEN is not write access
  - LP: #509730
* memcg: avoid oom-killing innocent task in case of use_hierarchy
  - LP: #509730
* Input: atkbd - add force relese key quirk for Samsung R59P/R60P/R61P
  - LP: #253874, #509730
* Add unlocked version of inode_add_bytes() function
  - LP: #509730
* ext4: fix sleep inside spinlock issue with quota and dealloc (#14739)
  - LP: #509730
* Linux 2.6.31.10
  - LP: #509730
* Linux 2.6.31.11
  - LP: #509730
* quota: decouple fs reserved space from quota reservation
  - LP: #510674
* ext4: Convert to generic reserved quota's space management.
  - LP: #510674
* hwmon: (adt7462) Fix pin 28 monitoring
  - LP: #510674
* netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq()
  - LP: #510674
* quota: Fix dquot_transfer for filesystems different from ext4
  - LP: #510674
* fix braindamage in audit_tree.c untag_chunk()
  - LP: #510674
* fix more leaks in audit_tree.c tag_chunk()
  - LP: #510674
* ACPI: sleep: another HP DMI entry for init_set_sci_en_on_resume
  - LP: #453963, #510674
* ACPI: add DMI entry for SCI_EN resume quirk on HP dv4
  - LP: #453963, #510674
* ACPI: sleep: another HP/Compaq DMI entries for
  init_set_sci_en_on_resume
  - LP: #453963, #510674
* ACPI: DMI init_set_sci_en_on_resume for HP-Compaq C700
  - LP: #453963, #510674
* Linux 2.6.31.12
  - LP: #510674

[ Ubuntu: 2.6.31-20.58 ]

* Revert "[Upstream] e1000: enhance frame fragment detection"
  - CVE-2009-4536
* Revert "[Upstream] e1000e: enhance frame fragment detection"
  - CVE-2009-4538
* e1000: enhance frame fragment detection
  - CVE-2009-4536
* e1000/e1000e: don't use small hardware rx buffers
  - CVE-2009-4536
* e1000e: enhance frame fragment detection
  - CVE-2009-4538
* KVM: PIT: control word is write-only
  - CVE-2010-0309
* connector: Delete buggy notification code.
  - CVE-2010-0410
* Fix potential crash with sys_move_pages
  - CVE-2010-0415
* futex: Handle user space corruption gracefully
  - CVE-2010-0622
* futex_lock_pi() key refcnt fix
  - CVE-2010-0623
* Split 'flush_old_exec' into two functions
  - CVE-2010-0307
* Fix 'flush_old_exec()/setup_new_exec()' split
  - CVE-2010-0307
* x86: get rid of the insane TIF_ABI_PENDING bit
  - CVE-2010-0307
* powerpc: TIF_ABI_PENDING bit removal
  - CVE-2010-0307
* sparc: TIF_ABI_PENDING bit removal
  - CVE-2010-0307
* x86: set_personality_ia32() misses force_personality32
  - CVE-2010-0307

1. By Tim Gardner on 2010-02-17

[ Qualcomm ]

* sparc: Kill PROM console driver.
* tty: Mark generic_serial users as BROKEN
* [ARM] msm: shared memory interface for baseband processor ipc
* [ARM] msm: gpio support
* [ARM] msm: shared memory tty interface
* [ARM] msm: shared memory qmi interface
* [ARM] msm: shared memory rpc router
* [ARM] msm: provide AMSS version selection mechanism
* [ARM] msm_rpc: support rpc servers
* [ARM] msm: Timer fixes.
* [ARM] msm: irq: fix lockdep issues
* [ARM] msm: irq: Add sleep support.
* [ARM] msm: clock: Cpu clk stepping.
* [ARM] msm: power management - add wakeup support and implement suspend to ram as wait for interrupt
* [ARM] msm: pick up partition table from bootloader via private ATAG
* [ARM] msm: enable installation of an FIQ handler
* [ARM] msm: halibut: Add memory configuration.
* [ARM] msm: clock: Simple cpufreq scaling based on screen ON/OFF
* [ARM] msm: halibut: support fiq mode kernel debugger if configured
* [ARM] msm: add keypad for halibut board
* [ARM] msm: trout: Add trout (aka Dream/G1) machine target and some defines
* [ARM] msm: trout: CPLD GPIO driver
* [ARM] msm: trout: platform specific keypad driver
* [ARM] msm: trout: obtain calibration data for the compass sensor
* [ARM] msm: trout: Code to extract wifi calibration data from ATAGs
* [ARM] msm: trout: htc acoustic driver
* [ARM] msm: trout: htc2wire driver to support htc headsets
* [ARM] msm: add hook for vbus state notification
* [ARM] trout: htc platform battery driver
* [ARM] msm: trout: Add msm_fb support to trout architecture
* [ARM] msm: clock: Adding ondemand cpufreq scaling.
* [ARM] msm: common: Add SDC device runtime registration
* [ARM] trout_mmc: Initial MMC support for Trout on 2.6.27
* [ARM] msm: trout: Adds trout Power Sink Driver
* [ARM] msm: trout: bluetooth: Use rfkill API to turn bluetooth chipset on/off.
* [ARM] msm: trout: Temporarily Disable DMA for SDC1
* [ARM] msm: Add MSM_DEBUG_UART option.
* [ARM] msm: lldebug: Fix waituart
* [ARM] msm: Fix bugs preventing modular build
* [ARM] msm: Turn ON DMA support for SDC1
* [ARM] msm: clock: Support for freq table in speed selection.
* [ARM] msm: clock: Fix cpu speed ramping down from 528mhz.
* [ARM] msm: trout-h2w: Don't call request_irq with interrupts disabled.
* [ARM] msm: generic_gpio: Don't pass GFP_KERNEL to kmalloc when holding a spinlock
* [ARM] msm: gpio: Don't call generic_handle_irq with interrupts enabled
* [ARM]: msm: clock: Adding PLL2 clocks for 528 power collapse stepping.
* [ARM] trout: Add abstract wifi control functions support
* [ARM] msm: halibut: add list of SND endpoints
* [ARM] msm: acpuclock: Fix conditional compile symbol in acpuclock.h.
* [ARM] msm: timer: Don't call ktime_get from msm_timer_sync_smem_clock
* [ARM] msm: Prevent clocksource read from jumping back after power collapse.
* [ARM] msm: Don't call ktime_get from sched_clock
* [ARM] msm: oprofile: Enable OProfile and preserve performance counters.
* [ARM] msm: htc_headset: Import new headset driver from HTC
* [ARM] msm: trout: Switch to new headset driver in trout
* [ARM] msm: move clock definitions to devices.c
* [ARM] msm: htc_acoustic: use smem and rpc to write acoustic table
* [ARM] msm: acpuclock: Remove VDD check during init.
* [ARM] msm: htc_pwrsink: Generify driver
* [ARM] msm: vibrator: Initial support for MSM PMIC vibrator
* [ARM] msm: FIQ: Add ability to unselect an FIQ IRQ
* [ARM] msm: iomap: Add entries for HSUSB_BASE, SSBI, and TSSC
* [ARM] sapphire: Initial import of Sapphire board support
* [ARM] msm: htc: Clean up USB support in trout and sapphire board files
* [ARM] msm: make clkctl speed struct internal
* [ARM] msm: acpuclock: Couple minimum AXI freq to the current CPU freq.
* [ARM] msm: Move cpufreq code from acpuclk.c to cpufreq.c
* [ARM] msm: acpuclock: Enable PLLs of stepping freqs when necessary.
* [ARM] msm: smd_qmi: Add a wakelock with a timeout to prevent sleep after receiving a qmi notification.
* [ARM] msm: smd_tty: Lock a wakelock for half a second when receiving data.
* [ARM] msm: smd_rpcrouter_servers: Hold a wakelock while calling rpc_call.
* [ARM] msm: smd_rpcrouter: Hold a wakelock while while reading a packet, and while packets are queued.
* Large update patch for arch/arm/mach-msm
* Large generic arm update.
* [ARM] msm: remove msme2 vreg control
* [ARM] msm: acpuclock: Rewrite runtime clock plan selection.
* [ARM] msm: smem_log: Add power log debugfs node
* [ARM] msm: Add rpc client operation framework
* [ARM] msm: pmic: prefix modem control APIs with pmic_
* [ARM] msm: acpuclock-8x50: Fix typo in efuse magic values.
* [ARM] msm: pmic: add new modem control APIs
* [ARM] msm: timer: reduce rounding error in time sync calculation
* [ARM] msm: bluetooth: power switch hardware support
* [ARM] msm: Add smd rpc ping module
* msm: export msm_rpc_create_server
* [ARM] msm: clock: Add new clocks for 7x27 and 8x50.
* [ARM] msm: Add write and read to execute tests and return results
* [ARM] msm: keep vmalloc space location with 2G/2G memory split
* [ARM] msm: handset: Add handset callback api support
* [ARM] msm: Save test results across reads and writes
* [ARM] msm: pm: set CLK_SLEEP_EN register before SWFI
* [ARM] msm: suspend: fix suspend restore code
* [ARM] msm: acpuclock-8x50: Fix SCPLL init and freq switching code.
* [ARM] msm: acpuclock-8x50: Fix efuse magic value bit length.
* [ARM] msm: move DRAM physical address for 8K QSD
* [ARM]: msm: Apply new MSM naming scheme
* [ARM]: msm: Add base board support for msm7x30
* [ARM] msm: Fix GPIO2 base address for ARCH_QSD8X50
* [ARM] msm: irq: Fix incorrect bounds checking
* [ARM] msm: svs: Make PMIC_DEFAULT_DCDC1 configurable
* [ARM] msm: smd_ctl2: Use per-inst buf and inc tx/rx buf size from 1k to 2k
* [ARM] msm: smd: Add support for msm7x30
* [ARM] msm: smd: Add error checking to smem_find calls
* [ARM] msm: proc_comm: Add support for msm7x30
* [ARM] msm: pmic: fix endless read operation during debugfs read
* [ARM] msm: Remove loopback driver
* [ARM] msm: acpuclock: Disable PLLs during 7x30 power collapse.
* [ARM] msm: pm: pm2: Enable msm_pm_restart restart handling.
* [ARM] msm: clock: Add support for voting on EBI1 min rate.
* [ARM] msm: clock: Use system bus QoS to vote for min AXI freq.
* [ARM] msm: idle: Use vfp subsystem to preserve vfp context
* [ARM] msm: add vreg reference count
* [ARM] msm: Add jtag debug register save & restore
* [ARM] msm: move DRAM physical address for qsd8k
* [ARM] msm: allow external LCDC display for 8K surf
* [ARM] msm: GPIO: group operations
* [ARM] pm: reset chip when Modem fails to respond to handshake
* [ARM] msm: moved cpufreq to late_initcall
* [ARM] msm: Update residencies and latencies for the sleep modes on 8x50.
* [ARM] msm: pm: Fix up existing workaround to enable code refactoring.
* [ARM] msm: clock: Refactor code to allow SoC specific implementation.
* [ARM] msm: clock: Add new list of supported clocks for 7x30.
* [ARM] msm: idle: add memory barriers, cache flush, TLB invalidation
* [ARM] msm: add proc_comm commands for clkctl_rpc_reset assert/deassert
* msm: Add more support in RPC Client Framework
* msm: Cleanup Ping MDM client driver
* msm: Add OEM RAPI RPC Client Driver.
* [ARM] msm: add new vreg IDs for MSM7X30
* msm: rpc: fix warnings when disabling MSM_ONCRPCROUTER_DEBUG
* arm: msm: fix BSD license statement in headers
* add arch_has_speculative_dfetch() to address dma caching issue
* [ARM] msm: AMSS >= 6350 swaps VFE_CLK and VFE_MDC_CLK
* msm: pmic: add HSED APIs
* msm: move DRAM physical address for 8K QSD processors
* msm: Include required header files in oem_rapi_client.h
* msm: irq: Fix msm_irq_enter_sleep2 to return correct status.
* msm: pm: reset chip when Modem fails to respond to handshake (n-way)
* msm: Add support for NULL RPC callback function
* msm: correct gpio register address for 8K
* msm: Make logging SMD debug messages a config option
* msm: pm: Add config option to choose power management timeout action
* msm: clock: Add support for clk_round_rate().
* msm: Add smd tty device interface for SMD port 'DATA21'
* msm: Fix bugs in oem_rapi driver
* msm: Add new smem items
* msm: clock: Add new proc-comm clock ids for 7x30.
* msm: dma: Use proper EXPORT_SYMBOL.
* msm: gpio: Add support for msm7x30
* msm: clock: Update supported clocks list for 7x30.
* msm: spi: Add SPI clock support for 7x30
* msm: add proc_comm commands for clkctl_rpc_rail on/off
* msm: acpuclock-8x50: Couple CPU freq and AXI freq.
* msm: clock: Implement direct clock control for 7x30.
* msm: socinfo: Add support for msm7x30
* msm: smc91x: off-by-one in memory resource
* msm: clock: Updated supported clock list for 7x30.
* msm: acpuclock-8x50: Avoid configuring PLL divider mux when not using it.
* msm: clock-7x30: Handle AXI_LI_ADSP_A clock dependencies.
* msm: allow smd_ctl_read to attempt reading more than maximum packet size
* msm: set low_latency flag for DATA1 smd port tty interface
* Use msm_rpc_connect_compatible API in pmic function
* msm: pm: correct CLK_SLEEP_EN bit value for 7x27
* msm: pm: fix residency math to match expiration time unit
* msm: pm: update shared memory bits
* msm: provide interface to set/clear smsm_intr_mask
* rpcrouter: cleanup printk messages
* smem_log: add missing newline in printk, use __func__
* msm: io: refactor msm_map_*_io() and compile out unused code
* msm: dma: disable dma clk when idle
* msm: Fix bug in ping modem client in callback reply
* msm: remote-spinlock: Use SWP-based locking with ARM11 apps cores
* msm: clock: Correct MI2S clock divider for 7x30
* msm: clock: Add SoC/board independent APIs to set/get max AXI frequency.
* msm: vreg: fix a typo for lvsw1
* msm: Change some SMD info messages to dbg messages to reduce logging
* msm: Check for correct RPC version and program in callback request
* msm: rpc: Add support for PING control message.
* msm: proc_comm add commands for clkctl
* msm: clock: Add MI2S codec clocks in 7x30 clock list
* msm: allow users to disable smem logger
* msm: Add kconfig option to disable NMEA driver
* msm: smd: split into separately configurable pieces
* msm: clock: Fix AXI rate voting use of magic value
* msm: acpuclock: Reduce AXI freq to 61.44 MHz at ACPU freq of 245.76 MHz
* msm: acpuclock: Restore VDD when returning from power collapse
* mm: qsd8x50: Fix incorrect permission faults
* mm: Add SW emulation for ARM domain manager feature
* msm: Add more support in RPC server infrastucture
* msm: acpuclock: Rewrite frequency stepping
* msm: acpuclock: Grab lock when changing ACPU freq.
* msm: clock: Add rotator clocks to 7x30 clock list
* msm: Fix UART base address for MSM7x30
* msm: acpuclock-8x50: Fix PLL0 speed for CDMA-only targets
* msm: qsd8x50: Add adaptive voltage scaling (AVS)
* msm: remote-spinlock: Remove WFE instruction.
* msm: dma: Add crypto engine DM channels.
* msm: dma_test: allocate minor number dynamically
* msm: Add API for clock power rail control using proc_comm
* msm: clear SMSM interrupt masks during initialization
* msm: timer: set SMSM bits for time sync during initialization
* msm: clock: Add camera clocks to 7x30 clock list
* msm: smd_rpcrouter: fix bug in pacmark messages sequence.
* msm: dma: Track waiting for requests as io_wait time
* msm: timer: Fix 7x30 debug timer register offsets and clock source
* msm: timer: Remove MSM_DGT_SHIFT for Scorpion processors
* msm: Handle SMD packets with 0 length
* msm: Add OEM proc comm commands enumeration
* msm: socinfo: Add support for hw_smem v3
* msm: proc_comm: fix typo of POCM for PCOM
* msm: mpp: add MPP as digital input configuration API
* msm: acpuclock-8x50: Clean-up PLL0 fix-up
* msm: acpuclock-8x50: Change "a11" naming convention to "acpu"
* msm: clock: Fix proc_comm 'OFF' flags for several 7x30 clocks
* msm: clock: Put clock lists in alphabetical order
* msm: iomap: Add 7x30 ACC register region
* msm: Add MSM7x30 FFA and MSM7x30 FLUID board types
* msm: internal_power_rail: Add MFC power rail control support
* msm: acpuclock: Move CPU-specific defines to correct driver files
* msm: clock: Implement clock reset API.
* msm: gpio: move two msm_gpio structs from gpio.c to gpio_chip.h
* msm: clock-7x30: Add image rotator clock support.
* msm: Add module to test proc comm system
* msm: socinfo: add SoC ID of 61 of ESM7x27 to 7x27 list.
* msm: clock-7x30: Add support for local PLL enable/disable.
* msm: acpuclock-8x50: Remove support for frequencies based on PLL1.
* msm: timer: use tiered method to sync DGT after power collapse
* msm: add pmic8058-gpio.c to support PM8058 GPIO in gpiolib framework
* msm: add pmic8058-mpp.c to support PM8058 MPP in gpiolib framework
* msm: clock: Add support for AXI_ROTATOR and HDMI clocks.
* mach_msm: Conditionalize SMD support in GPIO code.
* mach_msm: dma: Use an ISR safe disable IRQ call
* msm: add grapefruit qsd8x50 support.
* msm: add config option for grapefruit platform
* msm: Add QSD8x50 ST1 machine type.
* msm: gpio: Fix misnamed ifdefs
* [ARM] fault: Check for VM_EXEC permission in prefetch abort
* sched: Extend completion api to allow io_wait time tracking
* pm_qos: Add QoS param, minimum system bus frequency
* [ARM] vfp: Add additional vfp interfaces
* Add missing bits for compilation.
* Remove more driver related stuff.
* rtc: Try to prevent RTC errors from accumulating.
* msm: RTC driver for Qualcomm MSM chipsets.
* Include tlbflush.h in pgtable.h
* ARM: dma-mapping: switch ARMv7 DMA mappings to retain 'memory' attribute
* mm: create pgprot macros to support various cacheable memory types
* system: update pgprot_device to use pgprot_modify
* mm: Make coherent memory as normal noncached on all MSM's
* msm: change dma_coherent_pre/post_ops() to use COHERENT_IS_NORMAL
* pmem: Add pmem driver
* pmem changes from Initial Contribution.
* [ARM] msm: pmem: PMEM_DEBUG defined according to defconfig
* pmem: various updates.
* pmem: add ioctls to clean and/or invalidate caches
* pmem: Add bitmap quantasized allocation algorithm.
* pmem: add api for PMEM alloc and free from kernel space
* pmem: Make number of allocated regions dynamic
* pmem: add more error checking in connect function.
* pmem: fix spinlock recursion messages
* pmem: verify alignment of incoming values
* pmem: add sysfs component for status of regions
* pmem: fix buddy free memory corruption bug
* pmem: fail device initialization if passed in a zero size
* pmem: fix output formatting and code cosmetics
* pmem: minor code fixes
* pmem: fix and simplify bitmap manipulation
* pmem: add 8k board support
* pmem: Add Kconfig description.
* [ARM] msm: Adding display drivers.
* [ARM] msm_fb: Don't crash if platform data is missing.
* [ARM] msm_fb: Fix bugs in dummy client driver, clean args for client functions.
* [ARM] msm: fb: Fixing bug in fb driver when invalid update is encountered.
* [ARM] msm: mdp: Refer to image memory by file struct instead of fd
* [ARM] msm: mdp: Missing image type when checking if src has alpha
* msm: msm_fb: update mach-msm msm_fb.h
* msm: msm_fb: add capabilities field
* msmfb: specify partial updates support as a panel capability.
* Initial Contribution for msm framebuffer.
* [ARM] msm_fb: fix mddi resume lock up
* msm_fb : bug fix for MDDI/LCDC auto detection feature.
* [ARM] msm_fb: change backlight to use max and min value
* msm: msm_fb: add platform data into board.h
* msm: msm_fb: update platform data backlight callback arguments.
* [ARM] msm_fb: increase toshiba backlight level
* Add video Kconfig changes
* [ARM] msm_fb: add support for Comet2 display
* Initial Contribution changes for msm_mdp.h
* [ARM] msm_fb: add gamma curve support
* [ARM] msm_fb: add histogram support
* msm_fb: Replace interruptible waits with killable waits
* [ARM] msm_fb: disable mddi from panel detection.
* msm_fb: fix for suspend resume issue
* msm_fb: Try to detect a hung MDP
* [ARM] msm_fb: change mdp idle wait time to 1 sec
* [ARM] msm fb: only call client_id function when it's defined
* [ARM] msm fb: rename external SVGA mode to WXGA
* [ARM] msm_fb: move LUT block after histogram
* [ARM] msm_fb: enable mddi client detection on lcdc platform
* msm: msm_fb: update 7x25 to use mddi prescan
* video: Fix failure to fill in file pointer upon bad pmem return.
* [ARM] msm_fb: csc pre limit vector fix
* msm_fb: better fix for suspend resume issue
* msm_fb: added LCD_3V regulator on/off support in lcdc.
* msm: add 7x27 lcdc_power_save callback
* [ARM] msm_fb: lcdc frame done bug fix
* [ARM] msm_fb: remove 24bpp check for lcdc
* [ARM] msm_fb: fix h2v2 image output
* msm_fb: fix BSD license statement in headers
* msm_fb: add backlight on/off support for msm7x27 lcdc
* msm_fb: clean up code which does not comply with linux coding standard
* msm_fb: add timeout during mddi wait
* msm_fb: Add AXI bus QoS API calls in pull drivers.
* msm_fb: add MDP4 features into existing MDP driver
* msm_fb: tvout frame done bug fix
* msm_fb: remove the notch filter in tv encoder
* msm_fb: set AXI bus frequency to default after lcdc/tvenc turns off.
* msm_fb: disable mdp irq during idle
* msm_fb: turn ON FFA Display after Bootup
* msm_fb: Add Toshiba WEGA initialization for msm7x30
* msm_fb: mdp4: Add support for 128 MHz AXI bus
* msm_fb: 8650 FFA suspend/resume display bug fix
* msm_fb: move mddi power save under on/off routine
* msm_fb: fix lcdc ystride value
* msm_fb: add sharpening support for non-scaled image
* msm_fb: add MDP_BLUR support
* msm_fb: cleanup Makefile to use CONFIGs directly
* msm_fb: add S-video option to tv output
* msm_fb: Support for dynamically changing mdp ccs matrix.
* msm_fb: turn off mddi power when there is no mddi panel
* msm_fb: disable mddi host timer under suspend
* msm_fb: Reduce AXI bus frequency to 62 Mhz from 128 Mhz
* msm_fb: add mdp4 lcdc feature
* msm_fb: add display panel auto detection
* msm_fb: remove msm_rpc calls for LCDC_PROC configuration.
* msm_fb: Add support for pclks
* msm_fb: Reduce AXI bus frequency to 58 Mhz from 64 Mhz.
* msm_fb: fix display panel driver auto detection error
* msm_fb: fix dependencies when disabling pmem
* msm_fb: increase brightness of Toshiba wvga display panel
* msm_fb: mddi toshiba init routine bug fix
* msm_fb: enable mdp hw vsync
* msm_fb: Added frame_count to debugfs dir
* msm_fb: store the actual lcdc clock rate
* Revert "msm_fb: store the actual lcdc clock rate"
* Revert "msm_fb: remove msm_rpc calls for LCDC_PROC configuration."
* msm_fb: add MDP4 RGB pipe as overlay base layer
* msm_fb: use driver specific Kconfig
* msm_fb: add grapefruit framebuffer support
* msm: separate grapefruit function by machine type
* msm_fb: Add wxga drive for ST1 panel
* msm_fb: correct porch values for ST1 WXGA display
* msm_fb: correct external WXGA name in Kconfig
* msm: qsd8x50: update pmem region to bitmap
* msm: qsd8x50: check pmem size.
* msm: Allow the size of the in-kernel PMEM region to be configured.
* msm: msm_fb: add msm framebuffer support
* smsc911x: Add Ethernet support for ST1
* msm: Extend datamover callback infrastructure
* msm: dma: Export flush/stop commands.
* mmc: block: extend support for more than 8 partitions
* mmc: mmcblk: Add new feature 'CONFIG_MMC_BLOCK_PARANOID_RESUME'
* PM: Add wake lock api.
* mmc: core: Hold a wake lock accross delayed work + mmc rescan
* mmc: Add status IRQ and status callback function to mmc platform data
* mmc: Add concept of an 'embedded' SDIO device.
* mmc: core: Add auto suspend functionality
* mmc: core: Accept EXT_CSD revision upto 1.5
* mmc: core: Add 1ms delay after sending CMD6 to MMC cards.
* mmc: sd: Add new CONFIG_MMC_PARANOID_SD_INIT for enabling retries during SD detection
* mmc: sd: Add retries in re-detection
* mmc: sd: When resuming, try a little harder to init the card
* mmc: sd: Remove debugging printk
* mmc: Add new API call 'sdio_reset_comm' for resetting communication with an SDIO device
* sdio: fix sdio_reset_comm() error path
* mmc: core: Decrease minimum length requirements for SDIO CIS_FUNCE
* trout: Add functions for WiFi Signed-off-by: David Brown <email address hidden>
* msm_sdcc: Initial port of Qualcomm MSM MMC driver.
* PM: Add early suspend api.
* msm: sdcc: Add support for write protect switch detection.
* arm: Add machine id for ST 1.5.
* usb: Add platform data for mass storage function.
* msm: mfd/tps65023 header.
* BMA150 platform data.
* Device data for MSM hsusb devices.
* Device data for MSM high-speed uarts.
* Device data for MSM camera drivers.
* Device data for MSM SPI drivers.
* Device data for MSM s1r72v05 driver.
* Device data for MSM TSIF driver.
* Device data for MSM battery driver.
* Device data for MSM kgsl driver.
* Device data for MSM boardfile support.
* Add internal mach-types definitions for 8650A targets.
* msm: Reset callback for I2C keyboard.
* msm: Refactor SMD driver. debug interface, separate channel list.
* msm: Add SMEM_SEFS_INFO smem item
* msm: qsd8x50 platform data updates.
* [ARM] msm: driver for MSM7X00A on-chip I2C controller.
* [ARM] msm: I2C: Send stop command to finish i2c transfer on timeout
* [ARM] msm: i2c: Try to read the requested number of bytes.
* [ARM] msm: i2c: Try to recover if the i2c bus is busy after a failed transfer.
* msm: i2c: add msm_set_i2c_mux function
* [ARM] msm: i2c: Perform entire i2c transfer at interrupt context.
* [ARM] msm: i2c: Prevent infinite reads.
* [ARM] msm: i2c: Improve error recovery
* [ARM] msm: i2c: Always read at least two bytes
* [ARM] msm: i2c: Only send STOP for last for the last write message in the group.
* [ARM] msm: i2c: Send another byte if we are still the bus master in msm_i2c_recover_bus_busy.
* i2c-msm changes from the initial contribution.
* [ARM] msm: i2c: Don't send STOP between write and read operations
* [ARM] msm: i2c: Configure I2C GPIOs from Linux side
* [ARM] msm_i2c: Fix Last Byte issues while reading.
* i2c_msm: Derive PRI and AUX interface numbers from adapter ID
* msm_i2c: Add multi-processor concurrency support for I2C driver.
* msm_i2c: Recovery function to recover from unexpected HW errors
* msm_i2c: Add I2C Auxiliary interface.
* msm: remote-spinlock: Add support for DAL remote spinlocks.
* msm: remote-spinlock: Use Dekker's Algorithm for 7x30 SoCs.
* msm: remote-spinlock: Fix Dekker's algorithm.
* remote_spinlock: Add trylock support for remote spin locks.
* remote_spinlock: Add remote mutex support.
* msm: irq: rename existing irq support to irq-vic
* msm: remote-spinlock: Add 'MSM' prefix to REMOTE_SPINLOCK_* Kconfigs.
* msm: Compilation fixes
* Rest of the IRQ code refactoring.
* msm: io: Extend HWIO area to cover EBI2 CS[67]
* msm_i2c: Use less restrictive inter-processor remote mutex locks
* msm_i2c: Workaround for hardware setup time issue.
* msm_i2c: I2C controller should be in receive-data state during reads.
* msm: sirc: Add support for 8x50A interrupts.
* smsc911x: Add Ethernet support for ST1
* msm: st1: Add experimental flag.
* msm: timer: halt when Modem fails to respond to time sync
* mddi: Add barriers for coherent memory accesses
* Update to latest MSM framebuffer driver.
* dma: barrier api for coherent memory before and after dma
* defconfig: Initial ST1 defconfig.
* msm_fb: add MSMFB_OVERLAY_GET ioctl
* msm_fb: Added data packet size option in mddi_host_register_write
* msm: Change type of msm_shared_ram_phys to 'unsigned int'.
* pmem: Add In-Kernel API for handling cache operations
* add Node Power Architecture (NPA) support
* PM: NPA should be off by default
* pmem: Fix Bitmap allocator to allocate the final bit for the device
* msm: board-qsd8x50: Support shared memory (SMI) for QSD8x50A.
* msm_fb: align height of 64X32 video tile format to 32 instead of 64
* msm_fb: Add configuration of background transparent color key
* msm: board-qsd8x50: Modify the check for Write Protect switch support.
* msm: Kconfig: Add SoC revision config parameter.
* msm: Introduce QSD8x50A Kconfig options.
* msm: Enable MMU corner case fixes only for 8x50 and not 8x50a.
* msm_fb: Fix two MDP flags with the same value
* msm: Add board support for ST 1.5.
* msm: board: Fix SDCC VREG assignments for ST 1.5.
* qsd8x50: Allow the size of the in-kernel PMEM region to be configured
* msm: Fix Kconfig to prevent building MACH_QSD8X50_ST1 for QSD8x50A.
* msm_fb: Add display driver for ST1.5
* msm: add platform support for ST1.5 display
* msm: Remove unused file 'keypad-surf-ffa.h'.
* mmc: msm_sdcc: Fix sdcc resume sequence
* mmc: msm_sdcc: Eliminate forced reset of SD controller port
* mmc: core: Add support for MMC cards with CSD structure revision 3.
* msm: acpuclock-8x50: Fix ACPU frequency detection when running off AXI.
* defconfig: Add initial ST 1.5 defconfig.
* KSAPI: Performance monitoring tool for Snapdragon linux
* msm: board-qsd8x50: Add Ethernet support for ST 1.5.
* msm: board-qsd8x50: Register ST 1.5 I2C devices.
* msm: configure and set the gpios as per the platform
* msm: acpuclock-8x50a: Add QSD8x50A ACPU frequency scaling driver.
* defconfig: Enable CPUFreq for ST 1.5.
* defconfig: automatic update
* defconfig: Choose the correct LCDC panel for ST 1.5.
* defconfig: Disable AVS and update default ACPU voltage to 1300mV for ST1
* defconfig: automatic update
* [ARM] msm: handset: Merge msm_handset driver into rpc_server_handset
* switch: port switch class and GPIO drivers from 2.6.29.
* msm: handset: Add support to report headset status to modem
* defconfig: Enable switch class for ST1.0.
* msm: Select kernel PHYS_OFFSET based on ARCH_* Kconfigs.
* msm: Makefile.boot: Select linker parameters based ARCH_* Kconfigs.
* msm: Makefile.boot: Add support for QSD8x50A.
* msm: socinfo: Add SoC IDs and cpu_is_qsd8x50a() function for QSD8x50A.
* msm: Set default QSD8x50A PHYS_OFFSET Kconfig.
* defconfig: autoupdate
* add msm_audio_aac.h
* msm: audio: enable audio in the makefile
* qdsp6: Replace existing 3.0 VDEC drivers with 2.0 VDEC drivers
* qdsp6: Replace 720P 2.0 video encoder with 1.0 driver
* qdsp6: Replace existing 3.1 audio drivers with 3.2 CAD drivers
* sound: soc: add msm alsa support
* alsa: soc: Fix the uninitialized usage of mutex
* msm8k_audio: Use a mute_info struct to pass path and mute info.
* alsa: soc: Remove pause before closing cad session.
* alsa: soc: Port alsa driver to kernel-2.6.29
* alsa: soc: Port alsa 8k driver to kernel-2.6.29
* alsa: soc: Support continuous range of sampling rates in qsd8k
* alsa: soc: 7k: Fix to connect snd endpoint once during init
* alsa: soc: 8k: Fix to stream volume control
* [ARM]: msm: Apply new MSM naming scheme
* alsa: soc: 8k: Fix to alsa playback and capture concurrency
* alsa: soc: 8k: Add volume caching support.
* alsa: soc: 8k: Modify MUTE control to support playback/Capture path
* alsa: soc: 7k: Ensure that buffer size is a multiple of period size
* alsa: soc: 8k: Ensure that buffer size is a multiple of period size
* alsa: soc: 7k: Fix to initial bit stream configuration passed to DSP.
* alsa: soc: 7k: Fix to max dB value permissible for volume control.
* alsa: soc: 8k: Add device volume control support for RX/TX path.
* alsa: soc: 8k: Remove stream volume update for TX path.
* alsa: soc: 8k: Add EOS support in playback
* alsa: soc: 7k: Add EOS support in playback
* alsa: soc: 8k: Initialize default values to volume and device settings
* alsa: soc: 8k: Remove unwanted check of device list support.
* alsa: soc: 8k: Fix underrun errors in alsa concurrent playback record.
* alsa: soc: 8k: Fix to ensure graceful exit if not yet enabled.
* alsa: soc: 7k: Fix to ensure graceful exit if not yet enabled.
* sound: msm-soc: add missing newlines to some printk()'s
* alsa: soc: Fix to include correct header file.
* msm: audio: 8k: Q6 API change
* pmem: fix dependencies when disabling pmem
* alsa: soc: msm: routing amixer controls for audio playback/voice
* alsa: 7x30: Fix the extra new line added to device name.
* msm: audio: 7x30: Update the audpp commands with correct parameters
* alsa: soc: 8k: Fix to avoid I/O error due to early stream start
* alsa: soc: Add support for multisession playbacks.
* alsa: soc: msm7x30: Fix for blocked voice call thread
* audio: 7x30: Add listener code to mixer interface
* audio: 7x30: Increase sound device list size
* alsa: soc: msm7x30: ASoc driver for pcm playback/capture
* alsa: mixer: snd device dynamic frequency change support
* alsa: soc: 8x50: new framework with dual interrupt sources
* sound: soc: msm: a few updates for 2.6.31
* msm: qsd8x50 defconfig: enable audio
* msm: usb: Add rpc calls for USB control.
* USB: EHCI: Qualcomm MSM USB EHCI driver.
* defconfig: Enable Qualcomm EHCI device on st1.5
* msm: Update hsusb RPC
* USB: MSM OTG support.
* defconfig: Enable USB OTG
* msm: put ST1.5 framebuffer back in SMI
* mmc: msm_sdcc: reset the controller in case of data CRC error
* mmc: Handle requests properly when block queue is plugged
* net: add support to supress random MAC address generation in smsc911x
* usb: msm_otg: sysfs support to switch between host & peripheral
* defconfig: Enable EHCI_ROOT_HUB_TT
* diag: Qualcomm SOC diagnostics driver.
* mm: dma_cache operations for non linearly mapped buffers
* drivers: char: msm video drivers
* drm: Add support for platform devices to register as DRM devices
* msm_kgsl: Add DRM support
* msm_kgsl: add grp_pclk handling
* msm_kgsl: report rev 2.1.1 instead of 2.1 due to hardware bug
* msm_kgsl: Vote for the maximum AXI bus speed
* Revert "msm_kgsl: Vote for the maximum AXI bus speed"
* msm_kgsl: Vote for maximum AXI bus speed
* DRM: Initalize the DRM device list
* DRM: Use platform appropriate indexes for the GEM fake mmap offset
* msm_kgsl: Bypass SQ RTR for host accesses.
* msm_kgsl: Add GEM support to the DRM device
* msm_kgsl: Multi context bug fix
* msm: kgsl: Power savings through GPU clock control
* msm_kgsl: Fix a double free and prevent errors when freeing null gpuaddr
* msm_kgsl: Increase maximum virtual address range to 256MB
* msm_kgsl: Add GEM support to the DRM device
* drm: msm_kgsl: memory allocation changes
* msm_fb: char: enable MDP blit from GEM
* msm_kgsl: Put back the file descriptor in kgsl_gem_obj_addr
* msm_kgsl: Add multi-context and cmdstream handling fixes
* Revert "msm_kgsl: Increase maximum virtual address range to 256MB"
* msm_kgsl: save gmem based on correct use of flags
* msm: kgsl: Remove AXI vote when the GPU is idle
* msm: kgsl: Increase idle timeout counter
* gpu: drm: Fix compile error
* msm: kgsl: Disable IRQ when GPU is idle
* msm_kgsl: Properly restore the bin base offset on context switches
* kgsl: Change sequence of clock calls to fix boot up issue on some 7x30s.
* msm_kgsl: Add graphics MMU support
* msm_kgsl: Set correct values for PM4_DRAW_INDX_BIN and PM4_DRAW_INDX_2_BIN
* msm_kgsl: Fixes multicontext screen corruption issue
* msm_kgsl: Add outer cache flushing if it exists.
* drm: Add drm_vm_close_locked()
* msm_kgsl: Move kgsl_sharedmem_init to module load
* msm_kgsl: Add generic pagetable allocation functions
* msm_kgsl: Enable GEM to allocate memory from different sources
* msm_kgsl: Add GPU bind and unbind ioctls
* msm_kgsl: Flush cached buffers in GEM
* msm: kgsl: Call kgsl_yamato_runpending before allocating memory.
* msm_kgsl: Do not wait for the REG_CP_RB_WPTR to be updated
* msm_kgsl: Disable shadow writes
* kgsl: add barriers for pmem noncached changed to Normal
* msm_kgsl: Only allow MDP blitting from from PMEM
* drm: Use kzalloc() where appropriate in platform init
* msm_kgsl: Map all memory allocations through the MMU
* msm_q6venc: enable cache for 8k video encoder
* kgsl: trivial compile fixes
* msm: defconfig: qsd8650 st1 turn on graphics support
* msm: Make the GPU0 PMEM region optional
* msm: Add in-kernel SMI PMEM region
* msm_kgsl: Clean up memory when timestamps are freed
* msm_kgsl: Allow greater control over GEM memory types
* msm: drm: couple stray bit removed to compile
* msm_kgsl: fix module init call for builtin
* defconfig: autoupdate
* defconfig: Enable kgsl for st1.5
* msm: fix warnings introduced in gcc 4.4.0
* Update an ARM config file for the kernel ebuild.
* Update the ARM config file to support USB. This gets USB keyboard and mouse working in the 2.6.31.12 kernel.
* Add the msm_mdp.h file to the list of headers to be installed.
* Rename config to match naming convention.
* Properly generate the splitconfig files for 2.6.31.12.
* sync config files with master branch (cherry picked from commit 63b8ab7a6a0caa25ddf433c8599328793076506f)

[ Tim Gardner ]

* UBUNTU: [Config] qcm-msm branch creation
  Based initial configuration from arch/arm/configs/qsd8650a-st1_5_defconfig