Ubuntu
krb5 package

krb5 1.11.3+dfsg-3ubuntu1 source package in Ubuntu

Changelog

krb5 (1.11.3+dfsg-3ubuntu1) trusty; urgency=low

  * Add build dependency on python-lxml. Closes: #725596.

krb5 (1.11.3+dfsg-3) unstable; urgency=low

  [ Benjamin Kaduk ]
  * Update config.sub and config.guess, patch from upstream, Closes: #717840
  * Update Brazillian Portugese Translation, thanks Fernando Ike,
    Closes: #719726
  * Bump the version of the gssrpc_clnt_create symbol.  The routine itself
    was changed in a backwards-compatible way, but callers from the kadm5
    libraries were changed to rely on the new behavior, Closes: #718275
  * Add symbols files for the kadm5 libraries.  The KADM5 API version number
    was increased for the 1.11 release but the corresponding library sonames
    were not, so we must indicate the behavior change ourself, Closes: #716772

  [ Sam Hartman ]
  * krb5-kdc depends on libverto-libev1, work around for #652699
  * Remove krb5-kdc conflict since it's more than one release cycle old
  * Add Benjamin Kaduk to uploaders

krb5 (1.11.3+dfsg-2) experimental; urgency=low

  * Run autoreconf to update configure based on aclocal patch

krb5 (1.11.3+dfsg-1) experimental; urgency=low

  *  New upstream version
      - Turns out 1.11.2+dfsg didn't include the pingpong fix, but this
    does , Closes: #

krb5 (1.11.2+dfsg-2) experimental; urgency=low

  * Import upstream's patch to not warn or error on variadic macros,
    Closes: #709824

krb5 (1.11.2+dfsg-1) experimental; urgency=low

  * New upstream version, Closes: #697662
      - By not depending on texinfo, we avoid FTBFSing from its changes,
      Closes: #708711
  * Fix "usage of keytabs gives "Generic preauthentication failure while
    getting initial credentials"" via upstream change to prefer keys in
    the keytab
    (Closes: #698534)
  * Fixed upstream "kerberos password policy attributes missing from
    kerberos.schema"  (Closes:
    #655381)
  * Remove arch-dep and arch-indep dependency in rules  (Closes: #708973)
 -- Matthias Klose <email address hidden>   Wed, 23 Oct 2013 18:47:25 +0200

Upload details

Uploaded by:
Matthias Klose
Uploaded to:
Trusty
Original maintainer:
Sam Hartman
Architectures:
any all
Section:
net
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
krb5_1.11.3+dfsg.orig.tar.gz 10.8 MiB 315823ed3e506978b24fe93b1deefb33391487c53ca2f748ae6e597f16324ffb
krb5_1.11.3+dfsg-3ubuntu1.debian.tar.gz 111.2 KiB 922cb7560a3e4a178221c350bd3390d9b325db5f20d1f4d763d0c435fc6e5cf7
krb5_1.11.3+dfsg-3ubuntu1.dsc 2.4 KiB 46d926657ed235f765f6381abf3c15f26e2569e7b30475fafd5975aea83d737c

View changes file

Binary packages built by this source

krb5-admin-server: MIT Kerberos master server (kadmind)

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the Kerberos master server (kadmind), which handles
 account creations and deletions, password changes, and other
 administrative commands via the Kerberos admin protocol. It also
 contains the command used by the master KDC to propagate its database to
 slave KDCs. This package is generally only used on the master KDC for a
 Kerberos realm.

krb5-doc: Documentation for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the installation, administrator, and user reference
 manuals for MIT Kerberos and the man pages for the MIT Kerberos
 configuration files.

krb5-gss-samples: MIT Kerberos GSS Sample applications

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains bgss-sample and gss-server, programs used to
 test GSS-API mechanisms. These programs are most commonly used in
 testing newly developed GSS-API mechanisms or in testing events
 between Kerberos or GSS implementations.

krb5-kdc: MIT Kerberos key server (KDC)

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the Kerberos key server (KDC). The KDC manages all
 authentication credentials for a Kerberos realm, holds the master keys
 for the realm, and responds to authentication requests. This package
 should be installed on both master and slave KDCs.

krb5-kdc-ldap: MIT Kerberos key server (KDC) LDAP plugin

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the LDAP plugin for the Kerberos key server (KDC)
 and supporting utilities. This plugin allows the KDC data to be stored
 in an LDAP server rather than the default local database. It should be
 installed on both master and slave KDCs that use LDAP as a storage
 backend.

krb5-locales: Internationalization support for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains internationalized messages for MIT Kerberos.

krb5-multidev: Development files for MIT Kerberos without Heimdal conflict

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 Most users wishing to build applications against MIT Kerberos should
 install libkrb5-dev. However, that package conflicts with heimdal-dev.
 This package installs libraries and headers in /usr/include/mit-krb5 and
 /usr/lib/mit-krb5 and can be installed along side heimdal-multidev, which
 provides the same facilities for Heimdal.

krb5-pkinit: PKINIT plugin for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains a plugin for the PKINIT protocol, which allows
 Kerberos tickets to be obtained using public-key credentials such as
 X.509 certificates or a smart card. This plugin can be used by the
 client libraries and the KDC.

krb5-user: Basic programs to authenticate using MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the basic programs to authenticate to MIT Kerberos,
 change passwords, and talk to the admin server (to create and delete
 principals, list principals, etc.).

libgssapi-krb5-2: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.

libgssrpc4: MIT Kerberos runtime libraries - GSS enabled ONCRPC

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an RPC library used by the Kerberos administrative
 programs and potentially other applications.

libk5crypto3: MIT Kerberos runtime libraries - Crypto Library

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.

libkadm5clnt-mit8: No summary available for libkadm5clnt-mit8 in ubuntu trusty.

No description available for libkadm5clnt-mit8 in ubuntu trusty.

libkadm5srv-mit8: transitional dummy package for libkadm5srv-mit9

 This transitional dummy package is safe to remove.

libkdb5-7: MIT Kerberos runtime libraries - Kerberos database

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the internal Kerberos database libraries.

libkrb5-3: MIT Kerberos runtime libraries

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.

libkrb5-dbg: Debugging files for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the debugging information for the MIT Kerberos
 libraries. Install this package if you need to trace problems inside the
 MIT Kerberos libraries with a debugger.

libkrb5-dev: Headers and development libraries for MIT Kerberos

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the symlinks, headers, and development libraries
 needed to compile and link programs that use the Kerberos libraries.

libkrb5support0: MIT Kerberos runtime libraries - Support library

 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service. That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.